video wall with 2 tvs

video wall

prepositions

video wall with 2 tvs

Cheap LCD video wall solution

World is now changing and using new technologies to get high performance as well as cost effective solution. As in the past, SAMSUNG, LG, AUO, BOE, and other well-known LCD panel suppliers only provided fully finished panels, resulting in high costs. With the advancement of the LCD industry, the cost of a whole machine is now lower than the cost of an LCD panel. As a result, Clients are looking for another cost-effective solution to assure a reasonable profit. Then, in order to reduce the material cost of the External Frame, the Open Cell solution is developed, which helps up the expansion of small-scale companies in the LCD industry. So, what is open cell solution and how it’s going to make a cost effective solution? An Open Cell is just a part of LCD panel without backlight. As we all know that getting the fully finished LCD panel (Traditional LCD module product) from SAMSUNG, LG, AUO, BOE, and other well-known suppliers were expensive. But, if we use Open cell solution to assemble all parts by ourselves to achieve the complete LCD module panel that would be very cost effective. In another approach, the Open Cell solution will not only reduce the cost of the LCD screen, but will also make the entire machine thinner than before. Certainly, a solution with a cheaper cost and a more fashionable appearance is currently very popular. The Open Cell Solution products will be the dominant trend in the LCD sector in the near future.

Why does LCD flash? What’s the solution?

With the wide application of LCD in vehicle products, instruments and other electronic products, there will always be flashing in the process of use, which will affect the use of customers. What we should do at this time? Now we would like to share with you the causes and solutions of LCD screen flashing: The frequency of the LCD screen itself is too high, resulting in the flash screen. However, in real life, it is rare for the device to flash due to high frequency. According to the industry technical personnel, people’s naked eyes have no sense of flicker for images over 60Hz, while the design standard of general LCD screens is basically within this data range, so under normal circumstances, the frequency will not be too high, but at the same time, the screen itself will not be excluded from failure. After testing by relevant instruments, it is really the fault of the screen itself. In addition to replacing the new monochrome LCD screen, it is to design the software related to the equipment. LCD flash screen solution: the best way is to increase the OSC frequency of IC to see the flash of LCD screen. Of course, if the LCD has separate row and column drivers, it can also be adjusted by setting the driver chip.   The frequency of LCD is close to that of light source. This is very common. Because the frequency of different light source is different, in some specific cases, when the frequency

Technical transformation of DLP seamless splicing screen

What is the reason why mainstream DLP seamless splicing screen companies have spared no effort to invest in cross-border? Looking at the development of the entire large-screen splicing industry, the cross-border layout is a choice that relevant companies have to make. The only difference lies in where the company will focus its efforts. In the past large-screen splicing field, DLP seamless splicing large-screen large screens are the well-deserved leader. Moreover, due to the high technical threshold of the industry and the limited number of enterprises engaged, it has been able to maintain a high profit margin. With the high-end development of LCD splicing and the rise of small-pitch LED screens, DLP seamless splicing screens are no longer unique from the application market level, and are squeezed due to inherent technical defects. Subsequently, in order to maintain the established operating profit, although DLP seamless splicing screen companies actively involved in liquid crystal display and small pitch, they have lost their original monopoly advantage. Obviously, this development model is not the traditional DLP without Sewing splicing screen companies want. In the face of a rapidly changing market, if DLP seamless splicing screen companies want to maintain their leading business model, break the inherent business circle, and find a new point of force, it has become the most effective means. From a long-term development perspective, from a single operation to a diversified operation, the corporate interests of DLP seamless splicing screens will be more guaranteed, but for the DLP seamless splicing screen industry

55 inch video wall

55 inch 3.5mm narrow bezel video wall study case in Germany

Product: 55 inch 3.5mm narrow bezel DID video wall
Installation time: 2021
Area: Germany
Key features:
• 55 inch 3.5mm narrow bezel video wall

• Original DID-LCD BOE panel
• Good white balance factory setting
• 4K resolution for the whole video wall screen
• Push out bracket, convenient for maintain service
• Daisy chain and DP loop support

Read More »
about video
Play Video

Related Products

Let's Have A Chat!

Learn How We
Helped 1000
Projects Get
Gain Success.