video wall windows 10

video wall

alphabeticals

video wall windows 10

Is the digital signage a liquid crystal display?

Everyone is very familiar with LCD TVs, but many people don’t understand digital signage products. In fact, when we go to a hotel or shopping mall, we often see this product in the lobby, which often displays the advertising content of the hotel or shopping mall. Most people think that this is an ordinary LCD TV, but the size is a bit larger, so is this really the case? Is a digital signage a liquid crystal display? In fact, digital signage is not that simple, and there are still many scenarios in which digital signage is currently used. In addition to the hotels we are talking about, many retail industries have also begun to use digital signage products. For example, the fast food restaurants we often go to have used light boxes behind the ordering counters to display their dishes. Now many stores have also upgraded to digital signage products. In simple terms, digital signage is actually a numerical display system used in the commercial field. 1. Digital signage is usually equipped with a system Here is the system, in fact, this is the biggest difference between digital signage and liquid crystal display. We all know that the LCD monitor itself is only responsible for the function of screen output. The most important role of digital signage is actually the system behind it. Different from ordinary intelligent LCD, the digital signage system has the function of remote management. Users can design the display content by themselves, or download the template

Why does LCD flash? What’s the solution?

With the wide application of LCD in vehicle products, instruments and other electronic products, there will always be flashing in the process of use, which will affect the use of customers. What we should do at this time? Now we would like to share with you the causes and solutions of LCD screen flashing: The frequency of the LCD screen itself is too high, resulting in the flash screen. However, in real life, it is rare for the device to flash due to high frequency. According to the industry technical personnel, people’s naked eyes have no sense of flicker for images over 60Hz, while the design standard of general LCD screens is basically within this data range, so under normal circumstances, the frequency will not be too high, but at the same time, the screen itself will not be excluded from failure. After testing by relevant instruments, it is really the fault of the screen itself. In addition to replacing the new monochrome LCD screen, it is to design the software related to the equipment. LCD flash screen solution: the best way is to increase the OSC frequency of IC to see the flash of LCD screen. Of course, if the LCD has separate row and column drivers, it can also be adjusted by setting the driver chip.   The frequency of LCD is close to that of light source. This is very common. Because the frequency of different light source is different, in some specific cases, when the frequency

How to prevent static electricity of LCD?

LCD screen will be widely used in many electronic products, one thing has been widely welcomed, and you will want to solve some problems, and pay attention to some things, let’s talk about how to pay attention to the anti-static problem of LCD screen? Electrostatic adsorption of dust reduces the insulation resistance of components and shortens the service life; Electrostatic discharge (ESD) damage, resulting in electronic components cannot work; the electromagnetic field produced by electrostatic discharge has a large amplitude and a wide frequency spectrum. Such electrostatic noise and electromagnetic interference make electronic equipment unable to work normally or even damaged.   Pay attention to:   The wristband should keep the body and the ground equipotential. ESD protection workbench should keep equipotential between device and ground. It is not allowed to place electrostatic insulating materials in the safe area .The circuit board with IC must be handled on the antistatic workbench. Wristbands and shoe covers should be tested every day to ensure that they meet the parameter requirements.   All instruments and equipment shall be grounded. Regard all components as electrostatic sensitive devices. Never touch sensitive devices or components without good grounding.   In the absence of other anti-static measures, do not take the IC installed in the anti-static tube. Use fixed-point ion eliminator in the process that may generate static electricity. If the IC is not on the process line or anti-static workbench, store them in a container with grounding shield. The gas and liquid flowing through IC should

about video
Play Video

Related Products

Screenage digital signage Extreme Ultra-Thin Display

Extreme Ultra-Thin Display

This model is the latest innovation in the digital signage industry, With only 20mm ultra-narrow bezel width results in a near-seamless display, bringing you a different viewing experience.

Read More »
LG Panel Video Wall

LG Panel Video Wall

Our Video Walls Displays offer the ultimate in versatility. With a hassle free setup it is easy for our Video Wall Displays to tile the video signal automatically
thanks to their integrated video matrix processor.

Read More »