video wall system price

Commercial or public display signs have an eminent impact on the viewer subconsciously. The profoundness and brightness of the signage especially the digital signage paves a way for a deeper understanding and depiction of brand value. The exorbitant digital signage is proving to be highly beneficial to put out a finer public image as well as marketing the right product for the right audience. The Window facing display being one of the widely utilized categories of the same. Digital empowerment has led to enormous digital innovations and businesses across the globe are increasingly adapting to the high brightness and narrow bezel professional LCDs. All around the world companies into the manufacturing of LCDs and LEDs are building a huge selection of the products that are color-calibrated, extremely power efficient and extensively bright. One such company is Screenage (Digital Signage Suppliers) that is manufacturing and supplying high end quality products. Let’s have a brief insight about the various benefits of high brightness digital signage. High perceptibility One of the foremost necessities of a digital signage is to have high visibility and resolution to make it clearly visible for the audience. In the day of a heavy sun, the low brightness may make it very difficult for the people to actually see what’s been displayed. High brightness is the most important aspect for high perceptibility. The increased usage of digital signage is majorly due to high dynamic resolution and high brightness attributes as compared to the conventional posters. The High Brightness Display

The ultra-narrow LCD splicing screen is based on pure hardware and adopts parallel high-speed graphics processing technology to realize the unified processing of multiple high-speed video signals, fundamentally replace the plug-in splicing controller, and solve the problem of limited VGA signal input. Clarity, brightness, and color saturation are three important performance indicators of liquid crystals. The ultra-narrow-edge LCD splicing unit has the characteristics of high definition, high brightness, and high color gamut. Because the LCD uses backlight tubes as the light source, the edges are generally wide. The 40-inch ordinary LCD screen has a margin width of more than 11mm. If used for splicing, the splicing gap should be at least 22mm, which will affect the visual effect. The LCD splicing wall adopts a liquid crystal screen with a narrow-edge structure design, and the edge is reduced by more than double, which does not affect the visual effect when used for splicing. The LCD splicing screen has ultra-narrow edges, the number of splicing can be selected arbitrarily (row (m) X column (n)), and the size of the screen also has a variety of options to meet the needs of different use occasions. The ultra-narrow edge of the LCD splicing screen can be customized according to the requirements of different users, and you can choose functions such as single-screen display, full-screen display, and arbitrary combination display. In view of the inconsistency of parameters between the LCD screen and the driving circuit of the LCD splicing screen, the Tianjin LCD splicing screen

With the wide application of LCD in vehicle products, instruments and other electronic products, there will always be flashing in the process of use, which will affect the use of customers. What we should do at this time? Now we would like to share with you the causes and solutions of LCD screen flashing： The frequency of the LCD screen itself is too high, resulting in the flash screen. However, in real life, it is rare for the device to flash due to high frequency. According to the industry technical personnel, people’s naked eyes have no sense of flicker for images over 60Hz, while the design standard of general LCD screens is basically within this data range, so under normal circumstances, the frequency will not be too high, but at the same time, the screen itself will not be excluded from failure. After testing by relevant instruments, it is really the fault of the screen itself. In addition to replacing the new monochrome LCD screen, it is to design the software related to the equipment. LCD flash screen solution: the best way is to increase the OSC frequency of IC to see the flash of LCD screen. Of course, if the LCD has separate row and column drivers, it can also be adjusted by setting the driver chip.   The frequency of LCD is close to that of light source. This is very common. Because the frequency of different light source is different, in some specific cases, when the frequency