video wall screens

video wall

alphabeticals

video wall screens

LCD splicing screen is often damaged by dust

At present, LCD splicing screens are becoming more and more mature in application industries such as indoor high-end command and control centers, dispatch centers, and monitoring centers. We all know that dust is harmful to the human body, but you certainly did not expect that dust will also do the same to LCD splicing screens. As an electronic product with extremely high technological content, LCD splicing has a great impact on it due to dust. The LCD splicing screen movement uses many optical components, and it is precisely the dust that damages the optical components the most. Contrast refers to the maximum brightness value that the large screen display unit can output divided by the darkest brightness value. When in a dark scene, the dust on the optical components will reflect stray light and project the light that should not be projected from the lens. The brightness of the dark part. Similarly, some light in the bright part will be blocked by dust, reducing the amount of light reflection and transmission, and reducing the brightness value of the bright part, the contrast will naturally decrease in the past. The color wheel of the LCD splicing screen is the main accessory for color processing, including a high-speed motor, which rotates at about 7200 revolutions per minute. If a lot of dust is attached to the periphery of the color wheel, it will affect the rolling of the color wheel, resulting in a decrease or instability of the color wheel speed, which

How to solve the dark spot on LCD screen?

With the progress of science and technology, LCD is more and more popular. However, the inherent and inevitable shortcomings of LCD have also been paid attention to. When it comes to LCD black spots, many people may not understand. Today, I will teach you how to look at black spots. I hope it can help you.   What is the dark spot of LCD? In fact, dark spot is more hidden than bright spot and bad spot, but its influence on use is far greater than bad spot. Sometimes on some screens, there will be some patches that are not very big. The black small class is as big as the soybean, and the big class may be as big as the thumb. Different from the bright and dark spots, the dark color system is only partially dark, which is not easy to find from the front, but only from the side.   The main reason for the formation of dark spots is that the external force has been squeezed for long time. We think that it is probably due to improper handling in the transportation process. LCD screens with black dots are usually hard to find on the front and more obvious on the side (just like the test perspective).We suggest that when you buy LCD, you should not only look at the bad points of the screen, but also look at the surface of the screen from multiple angles, and set the screen to white. If you find

What are the basic components of LCD?

We will use some electronic devices in our life, LCD module is one of the electronic components. Everyone’s understanding of it must be relatively strange, and then we will talk about the knowledge in this respect.   The following is an introduction to the three basic components and features of LCD. Let’s take a look with the editor: Liquid Crystal Materials Liquid crystal material is the main body of liquid crystal display. Different devices use different liquid crystal materials. Most liquid crystal materials are composed of several or even more than ten kinds of single liquid crystal materials.   Polarizer The light sheet, also known as polarized light, is made of plastic film material, coated with a layer of optical pressure sensitive adhesive, which can be pasted on the surface of the liquid crystal cell. There is a protective film on the surface of the front polarizer, which should be removed when using. The polarizer is afraid of high temperature and high humidity, which will depolarize or blister under high temperature or high humidity conditions.   Glass Substrate A kind of float production thin glass sheet with extremely flat surface, the surface of which is evaporated with a layer of zn203 or sn02 transparent conductive layer, i.e. ITO film, is processed into transparent conductive pattern. If scratched, cut or corroded, the vacuum device will be scrapped.

about video
Play Video

Related Products

Let's Have A Chat!

Learn How We
Helped 1000
Projects Get
Gain Success.