video wall samsung

video wall

alphabeticals

video wall samsung

The difference between LCD splicing screen and LCD display

With the popularization of the construction of national smart cities and safe cities, LCD splicing screens, as the best terminal display equipment, are favored by various industries and are perfectly integrated into our lives; as we all know, the LCD splicing industry is a sunrise industry with broad development. The prospects and entry barriers are extremely low. Therefore, the LCD splicing market has attracted an influx of many manufacturers, and the actual products of manufacturers are uneven. The viewing angle of the LCD splicing screen can reach 178 degrees, while the ordinary LCD can only see the 178-degree blank space. This is a very important criterion for distinguishing LCD splicing screens and LCD monitors. There is also the difference between the input signals of the two. The splicing screen is mainly the input video signal. In order to meet the interface requirements of different front-end devices, the splicing screen interface will be much richer than the display, including BNC, VGA, RGB, HDMI, DVI, S A variety of interfaces such as terminals meet the input requirements of different signals, while the monitor mainly inputs VGA signals, and the interfaces are mainly VGA, S-terminal, etc., which cannot meet the signal input requirements of various monitoring equipment. What is the difference between an LCD splicing screen and an LCD monitor, be sure to read it clearly when buying The driving scheme of LCD splicing screen is different, that is, the display motherboard scheme is different. Since the LCD display usually takes no more

About the resolution of LCD

Resolution Resolution is a very important performance indicator. It refers to the number of points that can be displayed horizontally and vertically on the screen (lines and planes on the screen are composed of points). The higher the resolution, the more information can be included in the same screen. 480×800 resolution and 320×240 resolution are perfect display. Because there is little difference between the two, but the maximum resolution is not necessarily the most appropriate resolution. If 480×8000 LCD is used in 320×240 LCD, the display content will be smaller.   Visual area of LCD It refers to the part of the display area that can be used to display the image in practical application. The full size is actually the size of its frame and PCB board, and the part that can be used to display images does not reach this size at all, because the frame takes up some space. Generally speaking, the area of 4-inch 480×800 LCD is 51.84×86.4mm, and that of 3.5-inch 320×240 LCD is 70.08×52.56mm. But for LCD, the size of area is basically the size of the visible area, and the space occupied by the frame is relatively small. The 4-inch 480×800 LCD has a display area of 51.84 * 86.4mm.So choose LCD screen, choose suitable for your own equipment.   Reaction speed The unit of time used to measure reaction speed is millisecond (ms), which is the time required for a pixel to go from light to dark and from dark to light.

Four core components of digital signage

Digital signage is a problem that we have discussed more recently, because digital signage is a relatively advanced identification product, and it is also a direction of the development of the sign industry. Therefore, it is reasonable for us to analyze the key points of digital signage. On the one hand, we can strengthen the promotion of digital signage. On the other hand, we can also help the promotion of digital signage. Today, our theme is an integral part of digital signage, that is to say, digital signage. What are the parts? We sorted out the following 4 parts: 1. The shell part, the shell is the part that we can see intuitively. The digital signage is not just a screen. The digital signage we see in reality will be in various shapes, looks very beautiful and generous, not alone The display, therefore, this shell has a very important decorative role. Although it does not help digital signage in terms of function, digital signage is also part of the entire identification system. Of course, the outline of the shape needs to be consistent with the overall style, so , This shell is essentially as important as other identification products. 2. Display, what we have a deeper understanding of digital signage at this stage should be the touch screen. This is a typical display device and an important link between digital signage and users. 3. The operating system and the shell have no soul, and the display itself has no soul.

55 inch video wall

55 inch 3.5mm narrow bezel video wall study case in Germany

Product: 55 inch 3.5mm narrow bezel DID video wall
Installation time: 2021
Area: Germany
Key features:
• 55 inch 3.5mm narrow bezel video wall

• Original DID-LCD BOE panel
• Good white balance factory setting
• 4K resolution for the whole video wall screen
• Push out bracket, convenient for maintain service
• Daisy chain and DP loop support

Read More »
about video
Play Video

Related Products

Best Price Video Wall

Best Price Video Wall

The Open Cell solution is developed, which helps up the expansion of small-scale companies in the LCD industry, An Open Cell is just a part of LCD panel without backlight.

Read More »

Let's Have A Chat!

Learn How We
Helped 1000
Projects Get
Gain Success.