video wall apk

video wall

alphabeticals

video wall apk

Up to 50%? LCD panel “price surge” may last until next year

Recently, the price rise trend of LCD is very obvious. Some original manufacturers have adjusted the ex-factory price many times, and some even adjusted the price more than 20% at one time “A panel factory recently raised its price twice in a row, each time adding 5 yuan to the original price. In fact, this kind of increase is not surprising in the industry”. The source said.   The cause and effect of this price increase   As for price increase, we are more concerned about price increase, duration and category. In fact, in this round of price increase, the rise of different LCD screens is not the same.   There are structural differences in the price increase. The main performance is that the price of low-end LCD products increased by 20% – 30% or even 40% – 50%.LTPS (low temperature polycrystalline silicon) screen and AMOLED (active matrix organic light emitting diode panel) used in high-end mobile phones have little or no price increase. At the same time, 32″ and 38.5″ LCD screens for small size TV sets have fallen below the cost price of materials, and manufacturers have been seeking price increases in recent months, while the price of 70″ or more LCD screens for large size TV sets has not fluctuated much. LCD agent Shenzhen weishixin Co., Ltd. Chairman Lu Naiming said.   According to reports, the last price rise cycle of LCD was from 2016 to 2017, and its overall market price has been falling since 2018.

LCD splicing screen is often damaged by dust

At present, LCD splicing screens are becoming more and more mature in application industries such as indoor high-end command and control centers, dispatch centers, and monitoring centers. We all know that dust is harmful to the human body, but you certainly did not expect that dust will also do the same to LCD splicing screens. As an electronic product with extremely high technological content, LCD splicing has a great impact on it due to dust. The LCD splicing screen movement uses many optical components, and it is precisely the dust that damages the optical components the most. Contrast refers to the maximum brightness value that the large screen display unit can output divided by the darkest brightness value. When in a dark scene, the dust on the optical components will reflect stray light and project the light that should not be projected from the lens. The brightness of the dark part. Similarly, some light in the bright part will be blocked by dust, reducing the amount of light reflection and transmission, and reducing the brightness value of the bright part, the contrast will naturally decrease in the past. The color wheel of the LCD splicing screen is the main accessory for color processing, including a high-speed motor, which rotates at about 7200 revolutions per minute. If a lot of dust is attached to the periphery of the color wheel, it will affect the rolling of the color wheel, resulting in a decrease or instability of the color wheel speed, which

Digital Signage Daily maintenance

1. Keep the humidity in the environment where the digital signage is used, and don’t let anything with damp properties enter your digital signage. Powering on digital signage that contains moisture will cause corrosion of the digital signage components and cause permanent damage. 2. To avoid problems that may be encountered, we can choose passive protection and active protection, try to keep the items that may cause damage to the digital signage away from the screen, and when cleaning the screen, wipe it as gently as possible to reduce the possibility of injury Minimize. 3. The relationship between digital signage and our users is the closest, and it is very necessary to do a good job in cleaning and maintenance. After being exposed to wind, sun, dust, etc. in an outdoor environment for a long time, there will definitely be a piece of dust on the screen after a period of time. This needs to be cleaned in time to prevent dust from covering the surface for a long time to affect the viewing effect. 4. It is required that the power supply is stable and the grounding protection is good. Do not use it under severe natural conditions, especially strong thunder and lightning. 5. It is strictly forbidden to enter the screen body such as water, iron powder and other easily conductive metal objects. Digital signage should be placed in a low-dust environment as much as possible. A large amount of dust will affect the display effect, and too

about video
Play Video

Related Products

Extreme Ultra-Thin Display

This model is the latest innovation in the digital signage industry, With only 18mm ultra-narrow bezel width results in a near-seamless display, bringing you a different viewing experience….

Read More »

Let's Have A Chat!

Learn How We
Helped 1000
Projects Get
Gain Success.