stratacache digital signage solutions

The following are the precautions for LCD module operation:   If the display screen is damaged and the internal LCD leaks, do not let it enter the mouth. If it gets on clothes or skin, wash it quickly with soap and water. In order to reduce static electricity, do not carry out assembly and other work in dry environment. The LCD module has a film to protect the display screen. Be careful when removing this protective film as it may generate static electricity. The display screen is made of glass. Do not apply mechanical impact, such as falling from height. It must be grounded correctly. Minimize electrode corrosion. Water droplets, moisture condensation or current in high temperature environment may accelerate electrode corrosion. At low temperature, liquid crystal solidification will lead to directional defects or bubbles. When the liquid crystal module is subject to strong vibration at low temperature, bubbles will also be generated. If the LCD module works for a long time and displays the same pattern, the pattern will remain on the screen like a phantom, and there will be subtle contrast differences. If you want to regain the normal working state, you can temporarily stop using it for a while. It is worth noting that this phenomenon will not have an adverse effect on the reliability of the performance.

Capacitive touch screen and resistive touch screen are mainly different in touch sensitivity, precision, cost, multi touch feasibility, anti-damage, cleaning and visual effect in sunlight.   Touch Sensitivity Resistive touch screen: it needs pressure to make all layers of the screen contact. It can be operated with fingers (even with gloves), nails, stylus, etc. Support for stylus is very important in Asian market, gesture and character recognition are valued everywhere. Capacitive touch screen: the slightest touch from the surface of a charged finger can also activate the capacitive sensing system below the screen. Non-living objects, nails and gloves are invalid. Handwriting recognition is difficult.   Accuracy Resistive touch screen: the accuracy is at least a single display pixel, which can be seen when using the stylus. It is easy to recognize handwriting and is helpful to operate in the interface using small control elements. Capacitive touch screen: the theoretical accuracy can reach several pixels, but it is actually limited by the finger contact area. So that it is difficult for users to accurately click the target less than 1cm2.   Cost Resistive touch screen: very cheap. Capacitive touch screen: the price of capacitive screen from different manufacturers is 10% to 50% higher than that of resistive screen. This extra cost doesn’t matter for flagship products, but it may deter mid-priced phones.   The feasibility of multi touch Resistive touch screen: not possible unless the resistive screen is reconstituted and connected to the circuit of the machine. Capacitive touch screen: depending

With the increase of information inquiries from multiple TV stations, many people are talking about LCD touch all-in-one. As a newest PC input device, it is the simplest, convenient, natural and suitable for China’s multiple TV stations. The input equipment for querying national conditions has many advantages such as sturdiness and durability, fast response speed, space saving, and easy communication. In order to facilitate the operation, many people use LCD touch all-in-one computers to replace the mouse or keyboard. When working, we must first touch the screen installed in the front of the display with our fingers or other objects, and then the system locates and selects information input according to the icons or menu units touched by the fingers. The liquid crystal touch all-in-one machine is composed of a touch detection component and a controller; the touch detection component is installed in front of the display screen to detect the user’s touch position and take over and send the controller; and the primary function of the controller is to absorb the touch point detection assembly Touch the information and convert it into contact coordinates, and then send it to the CPU. It can also absorb the commands sent by the CPU and execute them. The touchpad uses pressure-sensitive capacitive touch technology, with the largest screen area. It consists of three parts: the bottom layer is the middle sensor, which is used to monitor whether the touchpad is High plastic material composition. The growth of LCD touch all-in-one technology shows