simple digital signage solution

How to do regular maintenance of large-screen optical equipment, DLP seamless splicing screen wall maintenance guide, as long as you remember and follow it, DLP seamless splicing screen wall will be no problem for 50 years. 1. Put the large-screen optical equipment in an environment that is easy to ventilate to increase the service life of the bulb of the large-screen optical equipment. 2. Regular cleaning of large-screen optical equipment can improve the brightness and contrast of the large-screen display system (increased by 10% to 30%). 3. When the temperature is very low, it will affect the normal use of the outdoor large screen. Generally, it is recommended to temporarily stop using it when it is below minus 30 degrees Celsius. Of course, taking other measures, such as installing an air conditioner in the box, can also ensure normal use. 4. Pay attention to the maintenance of daily optical components (color wheel, LCD panel, polarizer, lens, etc.) to prevent premature aging. 5. If the DLP seamless splicing wall fails, please contact the manufacturer in time. The above five points are the maintenance guide for DLP seamless splicing screen wall for everyone. I hope you will pay more attention to it during use.

1. Keep the humidity in the environment where the digital signage is used, and don’t let anything with damp properties enter your digital signage. Powering on digital signage that contains moisture will cause corrosion of the digital signage components and cause permanent damage. 2. To avoid problems that may be encountered, we can choose passive protection and active protection, try to keep the items that may cause damage to the digital signage away from the screen, and when cleaning the screen, wipe it as gently as possible to reduce the possibility of injury Minimize. 3. The relationship between digital signage and our users is the closest, and it is very necessary to do a good job in cleaning and maintenance. After being exposed to wind, sun, dust, etc. in an outdoor environment for a long time, there will definitely be a piece of dust on the screen after a period of time. This needs to be cleaned in time to prevent dust from covering the surface for a long time to affect the viewing effect. 4. It is required that the power supply is stable and the grounding protection is good. Do not use it under severe natural conditions, especially strong thunder and lightning. 5. It is strictly forbidden to enter the screen body such as water, iron powder and other easily conductive metal objects. Digital signage should be placed in a low-dust environment as much as possible. A large amount of dust will affect the display effect, and too