second monitor display stretched windows 10

stretched display

alphabeticals

How to make the LED display screen more high-definition

Improve the contrast of the LED display: Contrast is one of the key factors that affect the visual effect. Generally speaking, the higher the contrast, the clearer and more vivid the image, and the brighter and brighter the color. High contrast is very helpful for image clarity, detail performance, and gray level performance. Increase the gray level of the LED display: the gray level of the LED display refers to the brightness level that can be distinguished from the darkest to the brightest of the single primary color brightness. The higher the gray level of the LED display, the richer the color , The color is brighter; on the contrary, the display color is single and the change is simple. The increase of the gray level can greatly increase the color depth, making the display level of the image color increase geometrically. Nowadays, many LED display manufacturers can set the gray scale of the display to 14bit~16bit, so that the image level can distinguish the details and the display effect is more delicate, vivid, and colorful. Narrowing the dot pitch of the LED display: narrowing the dot pitch of the LED display can greatly improve the clarity of the display screen, because the smaller the dot pitch, the higher the pixel density per unit area of ​​the LED display, and the more details that can be displayed More, the screen display is more delicate and lifelike. The combination of LED display and video processor: The LED video processor can use

Advantages of ultra-narrow LCD splicing screen

The ultra-narrow LCD splicing screen is based on pure hardware and adopts parallel high-speed graphics processing technology to realize the unified processing of multiple high-speed video signals, fundamentally replace the plug-in splicing controller, and solve the problem of limited VGA signal input. Clarity, brightness, and color saturation are three important performance indicators of liquid crystals. The ultra-narrow-edge LCD splicing unit has the characteristics of high definition, high brightness, and high color gamut. Because the LCD uses backlight tubes as the light source, the edges are generally wide. The 40-inch ordinary LCD screen has a margin width of more than 11mm. If used for splicing, the splicing gap should be at least 22mm, which will affect the visual effect. The LCD splicing wall adopts a liquid crystal screen with a narrow-edge structure design, and the edge is reduced by more than double, which does not affect the visual effect when used for splicing. The LCD splicing screen has ultra-narrow edges, the number of splicing can be selected arbitrarily (row (m) X column (n)), and the size of the screen also has a variety of options to meet the needs of different use occasions. The ultra-narrow edge of the LCD splicing screen can be customized according to the requirements of different users, and you can choose functions such as single-screen display, full-screen display, and arbitrary combination display. In view of the inconsistency of parameters between the LCD screen and the driving circuit of the LCD splicing screen, the Tianjin LCD splicing screen

How to prevent static electricity of LCD?

LCD screen will be widely used in many electronic products, one thing has been widely welcomed, and you will want to solve some problems, and pay attention to some things, let’s talk about how to pay attention to the anti-static problem of LCD screen? Electrostatic adsorption of dust reduces the insulation resistance of components and shortens the service life; Electrostatic discharge (ESD) damage, resulting in electronic components cannot work; the electromagnetic field produced by electrostatic discharge has a large amplitude and a wide frequency spectrum. Such electrostatic noise and electromagnetic interference make electronic equipment unable to work normally or even damaged.   Pay attention to:   The wristband should keep the body and the ground equipotential. ESD protection workbench should keep equipotential between device and ground. It is not allowed to place electrostatic insulating materials in the safe area .The circuit board with IC must be handled on the antistatic workbench. Wristbands and shoe covers should be tested every day to ensure that they meet the parameter requirements.   All instruments and equipment shall be grounded. Regard all components as electrostatic sensitive devices. Never touch sensitive devices or components without good grounding.   In the absence of other anti-static measures, do not take the IC installed in the anti-static tube. Use fixed-point ion eliminator in the process that may generate static electricity. If the IC is not on the process line or anti-static workbench, store them in a container with grounding shield. The gas and liquid flowing through IC should

second monitor display stretched windows 10

about video
Play Video

Related Products

Let's Have A Chat!

Learn How We
Helped 1000
Projects Get
Gain Success.