lcd video wall samsung

lcd video wall

alphabeticals

lcd video wall samsung

How to make the LED display screen more high-definition

Improve the contrast of the LED display: Contrast is one of the key factors that affect the visual effect. Generally speaking, the higher the contrast, the clearer and more vivid the image, and the brighter and brighter the color. High contrast is very helpful for image clarity, detail performance, and gray level performance. Increase the gray level of the LED display: the gray level of the LED display refers to the brightness level that can be distinguished from the darkest to the brightest of the single primary color brightness. The higher the gray level of the LED display, the richer the color , The color is brighter; on the contrary, the display color is single and the change is simple. The increase of the gray level can greatly increase the color depth, making the display level of the image color increase geometrically. Nowadays, many LED display manufacturers can set the gray scale of the display to 14bit~16bit, so that the image level can distinguish the details and the display effect is more delicate, vivid, and colorful. Narrowing the dot pitch of the LED display: narrowing the dot pitch of the LED display can greatly improve the clarity of the display screen, because the smaller the dot pitch, the higher the pixel density per unit area of ​​the LED display, and the more details that can be displayed More, the screen display is more delicate and lifelike. The combination of LED display and video processor: The LED video processor can use

What are the basic components of LCD?

We will use some electronic devices in our life, LCD module is one of the electronic components. Everyone’s understanding of it must be relatively strange, and then we will talk about the knowledge in this respect.   The following is an introduction to the three basic components and features of LCD. Let’s take a look with the editor: Liquid Crystal Materials Liquid crystal material is the main body of liquid crystal display. Different devices use different liquid crystal materials. Most liquid crystal materials are composed of several or even more than ten kinds of single liquid crystal materials.   Polarizer The light sheet, also known as polarized light, is made of plastic film material, coated with a layer of optical pressure sensitive adhesive, which can be pasted on the surface of the liquid crystal cell. There is a protective film on the surface of the front polarizer, which should be removed when using. The polarizer is afraid of high temperature and high humidity, which will depolarize or blister under high temperature or high humidity conditions.   Glass Substrate A kind of float production thin glass sheet with extremely flat surface, the surface of which is evaporated with a layer of zn203 or sn02 transparent conductive layer, i.e. ITO film, is processed into transparent conductive pattern. If scratched, cut or corroded, the vacuum device will be scrapped.

Advantages of ultra-narrow LCD splicing screen

The ultra-narrow LCD splicing screen is based on pure hardware and adopts parallel high-speed graphics processing technology to realize the unified processing of multiple high-speed video signals, fundamentally replace the plug-in splicing controller, and solve the problem of limited VGA signal input. Clarity, brightness, and color saturation are three important performance indicators of liquid crystals. The ultra-narrow-edge LCD splicing unit has the characteristics of high definition, high brightness, and high color gamut. Because the LCD uses backlight tubes as the light source, the edges are generally wide. The 40-inch ordinary LCD screen has a margin width of more than 11mm. If used for splicing, the splicing gap should be at least 22mm, which will affect the visual effect. The LCD splicing wall adopts a liquid crystal screen with a narrow-edge structure design, and the edge is reduced by more than double, which does not affect the visual effect when used for splicing. The LCD splicing screen has ultra-narrow edges, the number of splicing can be selected arbitrarily (row (m) X column (n)), and the size of the screen also has a variety of options to meet the needs of different use occasions. The ultra-narrow edge of the LCD splicing screen can be customized according to the requirements of different users, and you can choose functions such as single-screen display, full-screen display, and arbitrary combination display. In view of the inconsistency of parameters between the LCD screen and the driving circuit of the LCD splicing screen, the Tianjin LCD splicing screen

55 inch video wall

55 inch 3.5mm narrow bezel video wall study case in Germany

Product: 55 inch 3.5mm narrow bezel DID video wall
Installation time: 2021
Area: Germany
Key features:
• 55 inch 3.5mm narrow bezel video wall

• Original DID-LCD BOE panel
• Good white balance factory setting
• 4K resolution for the whole video wall screen
• Push out bracket, convenient for maintain service
• Daisy chain and DP loop support

Read More »
about video
Play Video

Related Products

Let's Have A Chat!

Learn How We
Helped 1000
Projects Get
Gain Success.