high brightness commercial display

Capacitive touch screen and resistive touch screen are mainly different in touch sensitivity, precision, cost, multi touch feasibility, anti-damage, cleaning and visual effect in sunlight.   Touch Sensitivity Resistive touch screen: it needs pressure to make all layers of the screen contact. It can be operated with fingers (even with gloves), nails, stylus, etc. Support for stylus is very important in Asian market, gesture and character recognition are valued everywhere. Capacitive touch screen: the slightest touch from the surface of a charged finger can also activate the capacitive sensing system below the screen. Non-living objects, nails and gloves are invalid. Handwriting recognition is difficult.   Accuracy Resistive touch screen: the accuracy is at least a single display pixel, which can be seen when using the stylus. It is easy to recognize handwriting and is helpful to operate in the interface using small control elements. Capacitive touch screen: the theoretical accuracy can reach several pixels, but it is actually limited by the finger contact area. So that it is difficult for users to accurately click the target less than 1cm2.   Cost Resistive touch screen: very cheap. Capacitive touch screen: the price of capacitive screen from different manufacturers is 10% to 50% higher than that of resistive screen. This extra cost doesn’t matter for flagship products, but it may deter mid-priced phones.   The feasibility of multi touch Resistive touch screen: not possible unless the resistive screen is reconstituted and connected to the circuit of the machine. Capacitive touch screen: depending

1. Keep the humidity in the environment where the digital signage is used, and don’t let anything with damp properties enter your digital signage. Powering on digital signage that contains moisture will cause corrosion of the digital signage components and cause permanent damage. 2. To avoid problems that may be encountered, we can choose passive protection and active protection, try to keep the items that may cause damage to the digital signage away from the screen, and when cleaning the screen, wipe it as gently as possible to reduce the possibility of injury Minimize. 3. The relationship between digital signage and our users is the closest, and it is very necessary to do a good job in cleaning and maintenance. After being exposed to wind, sun, dust, etc. in an outdoor environment for a long time, there will definitely be a piece of dust on the screen after a period of time. This needs to be cleaned in time to prevent dust from covering the surface for a long time to affect the viewing effect. 4. It is required that the power supply is stable and the grounding protection is good. Do not use it under severe natural conditions, especially strong thunder and lightning. 5. It is strictly forbidden to enter the screen body such as water, iron powder and other easily conductive metal objects. Digital signage should be placed in a low-dust environment as much as possible. A large amount of dust will affect the display effect, and too