display stretched on widescreen monitor

stretched display

alphabeticals

display stretched on widescreen monitor

Advantages of LCD

LCD mainly includes TFT, UFB, TFD, STN and other types of LCD. The structure of LCD is to place liquid crystal in two parallel glasses. There are many vertical and horizontal small wires between the two glasses. The direction of rod crystal molecules is controlled by power on, and the light is refracted to produce a picture.   High brightness, The higher the brightness value of the array LCD, the brighter the picture will be without blurring. Advanced display can display clearer and higher brightness product features. We rely on polarization filters and light itself. With the practice of natural light in all corners of the world, a series of liquid crystal filters must be parallel.   The higher the contrast, the more colorful and saturated the color will be, and the higher the plane will be. On the contrary, the color change is low, the color display is poor, the image will be flattened, and the color change value is different, even higher. Compared with CRT imager, LCD dot matrix LCD display has the advantages of zero radiation, low power consumption, small heat dissipation, small volume, accurate image recovery and high character visualization.   The view of “big view” simply means that the view in front of the screen can be seen the larger the sight distance, the easier it will be; As long as the viewer changes the viewing position slightly, the picture may become blurred.

Why does LCD flash? What’s the solution?

With the wide application of LCD in vehicle products, instruments and other electronic products, there will always be flashing in the process of use, which will affect the use of customers. What we should do at this time? Now we would like to share with you the causes and solutions of LCD screen flashing: The frequency of the LCD screen itself is too high, resulting in the flash screen. However, in real life, it is rare for the device to flash due to high frequency. According to the industry technical personnel, people’s naked eyes have no sense of flicker for images over 60Hz, while the design standard of general LCD screens is basically within this data range, so under normal circumstances, the frequency will not be too high, but at the same time, the screen itself will not be excluded from failure. After testing by relevant instruments, it is really the fault of the screen itself. In addition to replacing the new monochrome LCD screen, it is to design the software related to the equipment. LCD flash screen solution: the best way is to increase the OSC frequency of IC to see the flash of LCD screen. Of course, if the LCD has separate row and column drivers, it can also be adjusted by setting the driver chip.   The frequency of LCD is close to that of light source. This is very common. Because the frequency of different light source is different, in some specific cases, when the frequency

The difference between LCD splicing screen and LCD display

With the popularization of the construction of national smart cities and safe cities, LCD splicing screens, as the best terminal display equipment, are favored by various industries and are perfectly integrated into our lives; as we all know, the LCD splicing industry is a sunrise industry with broad development. The prospects and entry barriers are extremely low. Therefore, the LCD splicing market has attracted an influx of many manufacturers, and the actual products of manufacturers are uneven. The viewing angle of the LCD splicing screen can reach 178 degrees, while the ordinary LCD can only see the 178-degree blank space. This is a very important criterion for distinguishing LCD splicing screens and LCD monitors. There is also the difference between the input signals of the two. The splicing screen is mainly the input video signal. In order to meet the interface requirements of different front-end devices, the splicing screen interface will be much richer than the display, including BNC, VGA, RGB, HDMI, DVI, S A variety of interfaces such as terminals meet the input requirements of different signals, while the monitor mainly inputs VGA signals, and the interfaces are mainly VGA, S-terminal, etc., which cannot meet the signal input requirements of various monitoring equipment. What is the difference between an LCD splicing screen and an LCD monitor, be sure to read it clearly when buying The driving scheme of LCD splicing screen is different, that is, the display motherboard scheme is different. Since the LCD display usually takes no more

about video
Play Video

Related Products

LG Panel Video Wall

LG Panel Video Wall

Our Video Walls Displays offer the ultimate in versatility. With a hassle free setup it is easy for our Video Wall Displays to tile the video signal automatically
thanks to their integrated video matrix processor.

Read More »

Extreme Ultra-Thin Display

This model is the latest innovation in the digital signage industry, With only 18mm ultra-narrow bezel width results in a near-seamless display, bringing you a different viewing experience….

Read More »

Let's Have A Chat!

Learn How We
Helped 1000
Projects Get
Gain Success.