digital signage uvu

The small-pitch LED display has the characteristics of high refresh, high grayscale, high brightness utilization, no image retention, low power consumption, and low EMI. It is not reflective for indoor applications, and the display contrast is as high as 5000:1; it is lightweight and ultra-thin, High precision, small space for transportation and use, quiet and efficient heat dissipation. Small-pitch LED display products have a wider color gamut space and faster response speed than ordinary large LED screens, and can realize seamless splicing and modular maintenance of any size. The whole picture played is uniform in color, high-definition lifelike, no abnormal display such as sweat spots and bright lines that are common on ordinary screens, and the picture switching is soft and does not flicker, and the picture quality is very delicate, which is close to the playback effect of a TV. The contrast ratio of 5000:1 can show excellent blackness when the screen is black, and it is the best among similar products. The biggest competitiveness of indoor high-density and small-pitch LED displays lies in the complete seamlessness of the large screen and the natural and true display colors. At the same time, in terms of post-maintenance, the LED large screen already has a mature point-by-point calibration technology. The large screen used for more than one or two years can be used to perform a one-time calibration of the entire screen. The operation process is simple and the effect is very good. When using a small-pitch LED display, pay attention

Resolution Resolution is a very important performance indicator. It refers to the number of points that can be displayed horizontally and vertically on the screen (lines and planes on the screen are composed of points). The higher the resolution, the more information can be included in the same screen. 480×800 resolution and 320×240 resolution are perfect display. Because there is little difference between the two, but the maximum resolution is not necessarily the most appropriate resolution. If 480×8000 LCD is used in 320×240 LCD, the display content will be smaller.   Visual area of LCD It refers to the part of the display area that can be used to display the image in practical application. The full size is actually the size of its frame and PCB board, and the part that can be used to display images does not reach this size at all, because the frame takes up some space. Generally speaking, the area of 4-inch 480×800 LCD is 51.84×86.4mm, and that of 3.5-inch 320×240 LCD is 70.08×52.56mm. But for LCD, the size of area is basically the size of the visible area, and the space occupied by the frame is relatively small. The 4-inch 480×800 LCD has a display area of 51.84 * 86.4mm.So choose LCD screen, choose suitable for your own equipment.   Reaction speed The unit of time used to measure reaction speed is millisecond (ms), which is the time required for a pixel to go from light to dark and from dark to light.

Capacitive touch screen and resistive touch screen are mainly different in touch sensitivity, precision, cost, multi touch feasibility, anti-damage, cleaning and visual effect in sunlight.   Touch Sensitivity Resistive touch screen: it needs pressure to make all layers of the screen contact. It can be operated with fingers (even with gloves), nails, stylus, etc. Support for stylus is very important in Asian market, gesture and character recognition are valued everywhere. Capacitive touch screen: the slightest touch from the surface of a charged finger can also activate the capacitive sensing system below the screen. Non-living objects, nails and gloves are invalid. Handwriting recognition is difficult.   Accuracy Resistive touch screen: the accuracy is at least a single display pixel, which can be seen when using the stylus. It is easy to recognize handwriting and is helpful to operate in the interface using small control elements. Capacitive touch screen: the theoretical accuracy can reach several pixels, but it is actually limited by the finger contact area. So that it is difficult for users to accurately click the target less than 1cm2.   Cost Resistive touch screen: very cheap. Capacitive touch screen: the price of capacitive screen from different manufacturers is 10% to 50% higher than that of resistive screen. This extra cost doesn’t matter for flagship products, but it may deter mid-priced phones.   The feasibility of multi touch Resistive touch screen: not possible unless the resistive screen is reconstituted and connected to the circuit of the machine. Capacitive touch screen: depending