digital signage solution uses

digital signage solution

related

The difference between LCD splicing screen and LCD display

With the popularization of the construction of national smart cities and safe cities, LCD splicing screens, as the best terminal display equipment, are favored by various industries and are perfectly integrated into our lives; as we all know, the LCD splicing industry is a sunrise industry with broad development. The prospects and entry barriers are extremely low. Therefore, the LCD splicing market has attracted an influx of many manufacturers, and the actual products of manufacturers are uneven. The viewing angle of the LCD splicing screen can reach 178 degrees, while the ordinary LCD can only see the 178-degree blank space. This is a very important criterion for distinguishing LCD splicing screens and LCD monitors. There is also the difference between the input signals of the two. The splicing screen is mainly the input video signal. In order to meet the interface requirements of different front-end devices, the splicing screen interface will be much richer than the display, including BNC, VGA, RGB, HDMI, DVI, S A variety of interfaces such as terminals meet the input requirements of different signals, while the monitor mainly inputs VGA signals, and the interfaces are mainly VGA, S-terminal, etc., which cannot meet the signal input requirements of various monitoring equipment. What is the difference between an LCD splicing screen and an LCD monitor, be sure to read it clearly when buying The driving scheme of LCD splicing screen is different, that is, the display motherboard scheme is different. Since the LCD display usually takes no more

The difference between touch all-in-one and ordinary touchpad

In fact, until now, many people still confuse the touch all-in-one with an ordinary touchpad, and think that as long as the touchable screen is a touch all-in-one, this understanding is wrong. Bank ATM teller machines and traditional supermarket cash registers that we see every day belong to traditional touch panels instead of touch all-in-ones. Traditional touch panels are generally single-point or double-point touch, and touch all-in-ones are actually It can realize infrared or capacitive multi-touch. We will talk about the advantages and disadvantages of infrared touch and capacitive touch and their application fields next. What is the difference between a touch all-in-one machine and an ordinary touchpad, you must know Capacitive touch screens are currently mainly used for the display of high-end devices such as mobile phones, tablets, and computers. The touch function can be realized with the skin of a human finger, multi-point, handwriting, etc. can be realized without any problem. Capacitive touch screens cannot be touched with gloves, and there is no response to touch with gloves, and the larger the size of the product required, the more expensive it is. The capacitive screen all-in-one machine is more beautiful, more beautiful, lighter and thinner, pure flat surface, and easy to realize. With waterproof function, the reaction speed is more sensitive at the same time. Infrared touch screens are currently not used for the display of high-end devices such as mobile phones, tablets, and computers. The infrared touch screen is currently only for the display. The infrared touch

Daily maintenance methods for LCD advertising machines

In daily life, we must keep the habit of “cleaning” the LCD advertising machine regularly. You can spray it on the LCD advertising machine screen with a special potion, and then gently wipe it with a clean white cloth. Try not to use a damp cloth with too much water content. Too much water content on the damp cloth can easily cause water to stay on the screen. Water entering the screen through the edge can cause a short circuit in the system and the LCD advertising machine cannot work normally. It is recommended to use soft scrubbing materials such as glasses cloth and lens paper to scrub the screen to avoid unnecessary scratches on the LCD advertising machine screen. The working environment of the LCD advertising machine directly affects the operation and service life of the LCD advertising machine. If the working environment of the LCD advertising machine is too bright, or even direct sunlight, this will not only affect the visual communication of the LCD advertising machine, but also damage the LCD advertising Machine screen electronic components. The air humidity of the working environment where the LCD advertising machine is located must be kept suitable, and two extremes must not be taken. Once the electronic equipment is too humid, it will only affect the circuit conditions and cause the LCD advertising machine to fail to work normally. No matter how good electronic products are, they will have their own longest operating time, and LCD advertising machines are no

digital signage solution uses

55 inch video wall

55 inch 3.5mm narrow bezel video wall study case in Germany

Product: 55 inch 3.5mm narrow bezel DID video wall
Installation time: 2021
Area: Germany
Key features:
• 55 inch 3.5mm narrow bezel video wall

• Original DID-LCD BOE panel
• Good white balance factory setting
• 4K resolution for the whole video wall screen
• Push out bracket, convenient for maintain service
• Daisy chain and DP loop support

Read More »
about video
Play Video

Related Products

Samsung Panel Video Wall

Samsung Panel Video Wall

As the leader of LCD product, Samsung is the top brand in worldwide. But, they have reduced production on video wall product from 2020, so the stock is not enough on the market.

Read More »

Let's Have A Chat!

Learn How We
Helped 1000
Projects Get
Gain Success.