digital signage solution overview

digital signage solution

alphabeticals

digital signage solution overview

Why does LCD flash? What’s the solution?

With the wide application of LCD in vehicle products, instruments and other electronic products, there will always be flashing in the process of use, which will affect the use of customers. What we should do at this time? Now we would like to share with you the causes and solutions of LCD screen flashing: The frequency of the LCD screen itself is too high, resulting in the flash screen. However, in real life, it is rare for the device to flash due to high frequency. According to the industry technical personnel, people’s naked eyes have no sense of flicker for images over 60Hz, while the design standard of general LCD screens is basically within this data range, so under normal circumstances, the frequency will not be too high, but at the same time, the screen itself will not be excluded from failure. After testing by relevant instruments, it is really the fault of the screen itself. In addition to replacing the new monochrome LCD screen, it is to design the software related to the equipment. LCD flash screen solution: the best way is to increase the OSC frequency of IC to see the flash of LCD screen. Of course, if the LCD has separate row and column drivers, it can also be adjusted by setting the driver chip.   The frequency of LCD is close to that of light source. This is very common. Because the frequency of different light source is different, in some specific cases, when the frequency

LCD touch screen cannot work, touch no response how to deal with

[Fault Phenomenon] One LCD touch screen doesn’t work, and there is no response when touching any part.   [Fault Analysis and Treatment] First check whether the connection interface is loose, and then check whether there is conflict between serial ports and interrupt number. If there is conflict, adjust resources to avoid conflict. Then check whether there are cracks on the surface of the touch screen. If there are cracks, replace them in time, Also need to check whether there is dirt on the touch screen surface, if there is, use a soft cloth to remove it. Observe and check whether the indicator light on the control box works normally. When it works normally, the indicator light is green and flashes.   If the above parts are normal, the touch screen can be checked by replacement method, first replace the control box, then replace the touch screen, and finally replace the host.   If it is a resistive touch screen, it can be overhauled as follows: 1)Check whether the connection of the touch screen is right, and whether one of the connections (taking 5V touch screen working voltage from the keyboard port) is connected. Please check the connection. 2)Observe the light condition of the touch screen control box. If it doesn’t light up or the red light is on, the control box is broken. Please replace it. 3)If not, please delete the touch screen driver and restart the computer, re-install the driver, or replace the driver with a newer version. 4)If

Screenage Outdoor Display Waterproof Test.

Experience unmatched precision and lightning-fast responsiveness with Sceeenage’s Outdoor Waterproof Touch Display. Our latest video showcases how our cutting-edge touch technology maintains flawless multi-touch accuracy, even when subjected to water immersion. Come rain or shine, count on Sceeenage to deliver an outdoor display that reacts instantaneously to every touch, ensuring a seamless user experience. Bid farewell to compromised performance in outdoor settings. Whether it’s a light drizzle or a torrential downpour, our display remains unfazed, ensuring every touch is detected with unrivaled precision and ultra-fast response times.No more compromises between outdoor durability and performance!  Contact us to learn more! #Sceeenage #OutdoorDisplay #Precision #Responsiveness https://youtu.be/lky53MVxfU8

about video
Play Video

Related Products