digital signage player display

Digital signage has been developed for many years, but due to various objective reasons, it has not yet been popularized on a large scale. However, in some government service establishments and high-end commercial establishments, digital signage has been widely adopted. This shows that digital signage Signage is moving forward along the logical route of commercial development, and it has not stopped, let alone its development. Based on years of experience in digital signage projects, we believe that the following three changes are initially expected in digital signage in the next three to five years: Development trend 1, response methods will be more diversified As far as the interactive mode of digital signage is concerned, the response mode is relatively simple. Basically, it is operated by the touch screen. After clicking, the digital signage will make corresponding actions according to relevant instructions, such as issuing tickets and so on. However, people’s pursuit is endless, and more needs have not been met for the time being. At this time, new solutions are often needed to solve these pain points. Therefore, will there be new ways to respond in the future? , The answer is yes, such as voice interaction, voice interaction, and interconnection with mobile phones, etc., may be the specific form of future response methods. Development trend 2, the full integration of reality and virtual We are no longer unfamiliar with the terms augmented reality (AR) and virtual reality (VR), because over the years, the development of AR and VR has

[Fault Phenomenon] One LCD touch screen doesn’t work, and there is no response when touching any part.   [Fault Analysis and Treatment] First check whether the connection interface is loose, and then check whether there is conflict between serial ports and interrupt number. If there is conflict, adjust resources to avoid conflict. Then check whether there are cracks on the surface of the touch screen. If there are cracks, replace them in time, Also need to check whether there is dirt on the touch screen surface, if there is, use a soft cloth to remove it. Observe and check whether the indicator light on the control box works normally. When it works normally, the indicator light is green and flashes.   If the above parts are normal, the touch screen can be checked by replacement method, first replace the control box, then replace the touch screen, and finally replace the host.   If it is a resistive touch screen, it can be overhauled as follows: 1）Check whether the connection of the touch screen is right, and whether one of the connections (taking 5V touch screen working voltage from the keyboard port) is connected. Please check the connection. 2）Observe the light condition of the touch screen control box. If it doesn’t light up or the red light is on, the control box is broken. Please replace it. 3）If not, please delete the touch screen driver and restart the computer, re-install the driver, or replace the driver with a newer version. 4）If