digital signage network

digital signage

alphabeticals

Three development trends of digital signage

Digital signage has been developed for many years, but due to various objective reasons, it has not yet been popularized on a large scale. However, in some government service establishments and high-end commercial establishments, digital signage has been widely adopted. This shows that digital signage Signage is moving forward along the logical route of commercial development, and it has not stopped, let alone its development. Based on years of experience in digital signage projects, we believe that the following three changes are initially expected in digital signage in the next three to five years: Development trend 1, response methods will be more diversified As far as the interactive mode of digital signage is concerned, the response mode is relatively simple. Basically, it is operated by the touch screen. After clicking, the digital signage will make corresponding actions according to relevant instructions, such as issuing tickets and so on. However, people’s pursuit is endless, and more needs have not been met for the time being. At this time, new solutions are often needed to solve these pain points. Therefore, will there be new ways to respond in the future? , The answer is yes, such as voice interaction, voice interaction, and interconnection with mobile phones, etc., may be the specific form of future response methods. Development trend 2, the full integration of reality and virtual We are no longer unfamiliar with the terms augmented reality (AR) and virtual reality (VR), because over the years, the development of AR and VR has

When customers use LCD, what should they pay attention to?

The following are the precautions for LCD module operation:   If the display screen is damaged and the internal LCD leaks, do not let it enter the mouth. If it gets on clothes or skin, wash it quickly with soap and water. In order to reduce static electricity, do not carry out assembly and other work in dry environment. The LCD module has a film to protect the display screen. Be careful when removing this protective film as it may generate static electricity. The display screen is made of glass. Do not apply mechanical impact, such as falling from height. It must be grounded correctly. Minimize electrode corrosion. Water droplets, moisture condensation or current in high temperature environment may accelerate electrode corrosion. At low temperature, liquid crystal solidification will lead to directional defects or bubbles. When the liquid crystal module is subject to strong vibration at low temperature, bubbles will also be generated. If the LCD module works for a long time and displays the same pattern, the pattern will remain on the screen like a phantom, and there will be subtle contrast differences. If you want to regain the normal working state, you can temporarily stop using it for a while. It is worth noting that this phenomenon will not have an adverse effect on the reliability of the performance.

How to choose a embedded touch screen

The LCD screen is the most intimate part of the touch all-in-one machine and the audience, and it is also the most critical part to improve the user experience. Therefore, the quality of the LCD screen directly determines the quality and application efficacy of the touch all-in-one machine. At present, in the touch all-in-one market, the most used LCD screens are plasma, LCD, and LED. The use period is usually between 6 and 10 years. Although we can extend the use period by replacing the lamp tube, but With the lamp tube replaced, a new problem has arisen because the liquid crystal in the screen will also age. In this case, the screen display of the touch all-in-one will inevitably affect the picture quality displayed by the touch all-in-one. The touch screen is a very important part of the touch all-in-one machine. It is an inductive liquid crystal display device that can receive input signals such as contacts. The current touch screens on the market mainly include resistive touch screens, capacitive touch screens, surface acoustic wave touch screens, and infrared touch screens. Each touch screen has its own advantages and disadvantages. You must combine your own use environment and the advantages and disadvantages of the touch screen to choose a touch screen suitable for your product. As the pillar supporting the normal operation of the control integrated machine, the quality of the power supply needs to be seen in the long-term use process. You can consult the supplier about the

digital signage network

about video
Play Video

Related Products

Let's Have A Chat!

Learn How We
Helped 1000
Projects Get
Gain Success.