digital signage jobs uk

The ultra-narrow LCD splicing screen is based on pure hardware and adopts parallel high-speed graphics processing technology to realize the unified processing of multiple high-speed video signals, fundamentally replace the plug-in splicing controller, and solve the problem of limited VGA signal input. Clarity, brightness, and color saturation are three important performance indicators of liquid crystals. The ultra-narrow-edge LCD splicing unit has the characteristics of high definition, high brightness, and high color gamut. Because the LCD uses backlight tubes as the light source, the edges are generally wide. The 40-inch ordinary LCD screen has a margin width of more than 11mm. If used for splicing, the splicing gap should be at least 22mm, which will affect the visual effect. The LCD splicing wall adopts a liquid crystal screen with a narrow-edge structure design, and the edge is reduced by more than double, which does not affect the visual effect when used for splicing. The LCD splicing screen has ultra-narrow edges, the number of splicing can be selected arbitrarily (row (m) X column (n)), and the size of the screen also has a variety of options to meet the needs of different use occasions. The ultra-narrow edge of the LCD splicing screen can be customized according to the requirements of different users, and you can choose functions such as single-screen display, full-screen display, and arbitrary combination display. In view of the inconsistency of parameters between the LCD screen and the driving circuit of the LCD splicing screen, the Tianjin LCD splicing screen

Digital signage has been developed for many years, but due to various objective reasons, it has not yet been popularized on a large scale. However, in some government service establishments and high-end commercial establishments, digital signage has been widely adopted. This shows that digital signage Signage is moving forward along the logical route of commercial development, and it has not stopped, let alone its development. Based on years of experience in digital signage projects, we believe that the following three changes are initially expected in digital signage in the next three to five years: Development trend 1, response methods will be more diversified As far as the interactive mode of digital signage is concerned, the response mode is relatively simple. Basically, it is operated by the touch screen. After clicking, the digital signage will make corresponding actions according to relevant instructions, such as issuing tickets and so on. However, people’s pursuit is endless, and more needs have not been met for the time being. At this time, new solutions are often needed to solve these pain points. Therefore, will there be new ways to respond in the future? , The answer is yes, such as voice interaction, voice interaction, and interconnection with mobile phones, etc., may be the specific form of future response methods. Development trend 2, the full integration of reality and virtual We are no longer unfamiliar with the terms augmented reality (AR) and virtual reality (VR), because over the years, the development of AR and VR has

We will use some electronic devices in our life, LCD module is one of the electronic components. Everyone’s understanding of it must be relatively strange, and then we will talk about the knowledge in this respect.   The following is an introduction to the three basic components and features of LCD. Let’s take a look with the editor: Liquid Crystal Materials Liquid crystal material is the main body of liquid crystal display. Different devices use different liquid crystal materials. Most liquid crystal materials are composed of several or even more than ten kinds of single liquid crystal materials.   Polarizer The light sheet, also known as polarized light, is made of plastic film material, coated with a layer of optical pressure sensitive adhesive, which can be pasted on the surface of the liquid crystal cell. There is a protective film on the surface of the front polarizer, which should be removed when using. The polarizer is afraid of high temperature and high humidity, which will depolarize or blister under high temperature or high humidity conditions.   Glass Substrate A kind of float production thin glass sheet with extremely flat surface, the surface of which is evaporated with a layer of zn203 or sn02 transparent conductive layer, i.e. ITO film, is processed into transparent conductive pattern. If scratched, cut or corroded, the vacuum device will be scrapped.