digital signage integrators

LCD brightness Brightness represents the amount of brightness of a picture per unit area. Specifically, the density of the amount of light passing through the normal direction of the screen. The unit is [CD / m2] or nit（1 nit = CD / m2).Brightness depends on the amount of light passing through the LCD and color film, and the brightness of the backlight.   LCD backlight requirements: The liquid crystal should have good transmittance; light weight; It should be thin and not easy to damage; The area light source with uniform brightness is the best; Low cost; The light color is pleasing to the eye, the primary color is rich, and the brightness can be adjusted; Low power consumption and easy power supply

The small-pitch LED display has the characteristics of high refresh, high grayscale, high brightness utilization, no image retention, low power consumption, and low EMI. It is not reflective for indoor applications, and the display contrast is as high as 5000:1; it is lightweight and ultra-thin, High precision, small space for transportation and use, quiet and efficient heat dissipation. Small-pitch LED display products have a wider color gamut space and faster response speed than ordinary large LED screens, and can realize seamless splicing and modular maintenance of any size. The whole picture played is uniform in color, high-definition lifelike, no abnormal display such as sweat spots and bright lines that are common on ordinary screens, and the picture switching is soft and does not flicker, and the picture quality is very delicate, which is close to the playback effect of a TV. The contrast ratio of 5000:1 can show excellent blackness when the screen is black, and it is the best among similar products. The biggest competitiveness of indoor high-density and small-pitch LED displays lies in the complete seamlessness of the large screen and the natural and true display colors. At the same time, in terms of post-maintenance, the LED large screen already has a mature point-by-point calibration technology. The large screen used for more than one or two years can be used to perform a one-time calibration of the entire screen. The operation process is simple and the effect is very good. When using a small-pitch LED display, pay attention

Almost all current smart projections use DLP seamless splicing screen projection technology, so how much do you know about this technology? Today I will briefly analyze the working principle and characteristics of this technology. The light source hits the light on the lens to obtain usable parallel light. The parallel light passes through the color wheel to obtain a uniform rectangular spot, which is then processed by DMD, the core component of DLP seamless splicing screen projection technology. Finally, the light is hit on the projection lens and passed The lens gets the projection we need, which is the working principle of DLP seamless splicing screen projection technology. DLP seamless splicing screen display board has extremely fast response time, you can switch independent pixels many times when displaying a frame of image. In addition, the strong reflective surface of the DMD chip can eliminate the obstacles in the light path and allow more light to be projected on the screen, and maximize the use of the projector’s light source to obtain a higher contrast picture. These are DLP seamless splicing screen projections. Advantages of technology. In addition, in terms of size, the DLP seamless splicing screen chip is lighter and smaller, which is one of the reasons why DLP seamless splicing screen projection technology is widely selected for small-size products such as smart projection. In addition, at the end of last year, Texas Instruments also launched a smaller size 1080P chip for smart projection. The compression of the chip size