digital signage displays for the office

At present, LCD splicing screens are becoming more and more mature in application industries such as indoor high-end command and control centers, dispatch centers, and monitoring centers. We all know that dust is harmful to the human body, but you certainly did not expect that dust will also do the same to LCD splicing screens. As an electronic product with extremely high technological content, LCD splicing has a great impact on it due to dust. The LCD splicing screen movement uses many optical components, and it is precisely the dust that damages the optical components the most. Contrast refers to the maximum brightness value that the large screen display unit can output divided by the darkest brightness value. When in a dark scene, the dust on the optical components will reflect stray light and project the light that should not be projected from the lens. The brightness of the dark part. Similarly, some light in the bright part will be blocked by dust, reducing the amount of light reflection and transmission, and reducing the brightness value of the bright part, the contrast will naturally decrease in the past. The color wheel of the LCD splicing screen is the main accessory for color processing, including a high-speed motor, which rotates at about 7200 revolutions per minute. If a lot of dust is attached to the periphery of the color wheel, it will affect the rolling of the color wheel, resulting in a decrease or instability of the color wheel speed, which

With the popularization of the construction of national smart cities and safe cities, LCD splicing screens, as the best terminal display equipment, are favored by various industries and are perfectly integrated into our lives; as we all know, the LCD splicing industry is a sunrise industry with broad development. The prospects and entry barriers are extremely low. Therefore, the LCD splicing market has attracted an influx of many manufacturers, and the actual products of manufacturers are uneven. The viewing angle of the LCD splicing screen can reach 178 degrees, while the ordinary LCD can only see the 178-degree blank space. This is a very important criterion for distinguishing LCD splicing screens and LCD monitors. There is also the difference between the input signals of the two. The splicing screen is mainly the input video signal. In order to meet the interface requirements of different front-end devices, the splicing screen interface will be much richer than the display, including BNC, VGA, RGB, HDMI, DVI, S A variety of interfaces such as terminals meet the input requirements of different signals, while the monitor mainly inputs VGA signals, and the interfaces are mainly VGA, S-terminal, etc., which cannot meet the signal input requirements of various monitoring equipment. What is the difference between an LCD splicing screen and an LCD monitor, be sure to read it clearly when buying The driving scheme of LCD splicing screen is different, that is, the display motherboard scheme is different. Since the LCD display usually takes no more