digital signage display us

The LCD screen is the most intimate part of the touch all-in-one machine and the audience, and it is also the most critical part to improve the user experience. Therefore, the quality of the LCD screen directly determines the quality and application efficacy of the touch all-in-one machine. At present, in the touch all-in-one market, the most used LCD screens are plasma, LCD, and LED. The use period is usually between 6 and 10 years. Although we can extend the use period by replacing the lamp tube, but With the lamp tube replaced, a new problem has arisen because the liquid crystal in the screen will also age. In this case, the screen display of the touch all-in-one will inevitably affect the picture quality displayed by the touch all-in-one. The touch screen is a very important part of the touch all-in-one machine. It is an inductive liquid crystal display device that can receive input signals such as contacts. The current touch screens on the market mainly include resistive touch screens, capacitive touch screens, surface acoustic wave touch screens, and infrared touch screens. Each touch screen has its own advantages and disadvantages. You must combine your own use environment and the advantages and disadvantages of the touch screen to choose a touch screen suitable for your product. As the pillar supporting the normal operation of the control integrated machine, the quality of the power supply needs to be seen in the long-term use process. You can consult the supplier about the

In daily life, we must keep the habit of “cleaning” the LCD advertising machine regularly. You can spray it on the LCD advertising machine screen with a special potion, and then gently wipe it with a clean white cloth. Try not to use a damp cloth with too much water content. Too much water content on the damp cloth can easily cause water to stay on the screen. Water entering the screen through the edge can cause a short circuit in the system and the LCD advertising machine cannot work normally. It is recommended to use soft scrubbing materials such as glasses cloth and lens paper to scrub the screen to avoid unnecessary scratches on the LCD advertising machine screen. The working environment of the LCD advertising machine directly affects the operation and service life of the LCD advertising machine. If the working environment of the LCD advertising machine is too bright, or even direct sunlight, this will not only affect the visual communication of the LCD advertising machine, but also damage the LCD advertising Machine screen electronic components. The air humidity of the working environment where the LCD advertising machine is located must be kept suitable, and two extremes must not be taken. Once the electronic equipment is too humid, it will only affect the circuit conditions and cause the LCD advertising machine to fail to work normally. No matter how good electronic products are, they will have their own longest operating time, and LCD advertising machines are no

LCD mainly consists of LCD black-and-white screen and TFT color screen. The following mainly introduces the relationship between the manufacturing difficulty and size of LCD black-and-white screen: According to expert statistics, the size and process difficulty of LCD segment code screen have such a rule: the larger the size, the more complex the manufacturing process. The main reasons are as follows:   The larger the size of LCD, the more difficult it is for staff to operate.   The larger the size of LCD is, the higher the requirement of equipment grade is.   The larger the size of LCD, the higher the defect rate of the product.   The larger the size of LCD, the more bad things will appear, such as darkening.