LCD touch screen cannot work, touch no response how to deal with
[Fault Phenomenon] One LCD touch screen doesn’t work, and there is no response when touching any part. [Fault Analysis and Treatment] First check whether the connection interface is loose, and then check whether there is conflict between serial ports and interrupt number. If there is conflict, adjust resources to avoid conflict. Then check whether there are cracks on the surface of the touch screen. If there are cracks, replace them in time, Also need to check whether there is dirt on the touch screen surface, if there is, use a soft cloth to remove it. Observe and check whether the indicator light on the control box works normally. When it works normally, the indicator light is green and flashes. If the above parts are normal, the touch screen can be checked by replacement method, first replace the control box, then replace the touch screen, and finally replace the host. If it is a resistive touch screen, it can be overhauled as follows: 1)Check whether the connection of the touch screen is right, and whether one of the connections (taking 5V touch screen working voltage from the keyboard port) is connected. Please check the connection. 2)Observe the light condition of the touch screen control box. If it doesn’t light up or the red light is on, the control box is broken. Please replace it. 3)If not, please delete the touch screen driver and restart the computer, re-install the driver, or replace the driver with a newer version. 4)If