digital signage display amazon

We will use some electronic devices in our life, LCD module is one of the electronic components. Everyone’s understanding of it must be relatively strange, and then we will talk about the knowledge in this respect.   The following is an introduction to the three basic components and features of LCD. Let’s take a look with the editor: Liquid Crystal Materials Liquid crystal material is the main body of liquid crystal display. Different devices use different liquid crystal materials. Most liquid crystal materials are composed of several or even more than ten kinds of single liquid crystal materials.   Polarizer The light sheet, also known as polarized light, is made of plastic film material, coated with a layer of optical pressure sensitive adhesive, which can be pasted on the surface of the liquid crystal cell. There is a protective film on the surface of the front polarizer, which should be removed when using. The polarizer is afraid of high temperature and high humidity, which will depolarize or blister under high temperature or high humidity conditions.   Glass Substrate A kind of float production thin glass sheet with extremely flat surface, the surface of which is evaporated with a layer of zn203 or sn02 transparent conductive layer, i.e. ITO film, is processed into transparent conductive pattern. If scratched, cut or corroded, the vacuum device will be scrapped.

With the wide application of LCD in vehicle products, instruments and other electronic products, there will always be flashing in the process of use, which will affect the use of customers. What we should do at this time? Now we would like to share with you the causes and solutions of LCD screen flashing： The frequency of the LCD screen itself is too high, resulting in the flash screen. However, in real life, it is rare for the device to flash due to high frequency. According to the industry technical personnel, people’s naked eyes have no sense of flicker for images over 60Hz, while the design standard of general LCD screens is basically within this data range, so under normal circumstances, the frequency will not be too high, but at the same time, the screen itself will not be excluded from failure. After testing by relevant instruments, it is really the fault of the screen itself. In addition to replacing the new monochrome LCD screen, it is to design the software related to the equipment. LCD flash screen solution: the best way is to increase the OSC frequency of IC to see the flash of LCD screen. Of course, if the LCD has separate row and column drivers, it can also be adjusted by setting the driver chip.   The frequency of LCD is close to that of light source. This is very common. Because the frequency of different light source is different, in some specific cases, when the frequency

Liquid crystal display (LCD) is a kind of display using liquid crystal as material.   What is liquid crystal? In fact, liquid crystal is a kind of material between solid and liquid. When heated, it will appear transparent liquid, and when cooled, it will crystallize into chaotic solid. Liquid crystal is an organic compound with regular molecular arrangement.   According to the different arrangement of molecular structure, liquid crystals can be divided into three types: Smectic liquid crystals similar to clay, Nematic liquid crystals similar to thin matchstick and Cholesteric liquid crystals similar to cholesterol.   The physical properties of these three kinds of liquid crystals are not the same. Nematic liquid crystals of the second kind are used in liquid crystal displays. The molecules are long rods. In the natural state, the long axes of these long rods are roughly parallel.