digital signage display als fernseher

1. Keep the humidity in the environment where the digital signage is used, and don’t let anything with damp properties enter your digital signage. Powering on digital signage that contains moisture will cause corrosion of the digital signage components and cause permanent damage. 2. To avoid problems that may be encountered, we can choose passive protection and active protection, try to keep the items that may cause damage to the digital signage away from the screen, and when cleaning the screen, wipe it as gently as possible to reduce the possibility of injury Minimize. 3. The relationship between digital signage and our users is the closest, and it is very necessary to do a good job in cleaning and maintenance. After being exposed to wind, sun, dust, etc. in an outdoor environment for a long time, there will definitely be a piece of dust on the screen after a period of time. This needs to be cleaned in time to prevent dust from covering the surface for a long time to affect the viewing effect. 4. It is required that the power supply is stable and the grounding protection is good. Do not use it under severe natural conditions, especially strong thunder and lightning. 5. It is strictly forbidden to enter the screen body such as water, iron powder and other easily conductive metal objects. Digital signage should be placed in a low-dust environment as much as possible. A large amount of dust will affect the display effect, and too

Resolution Resolution is a very important performance indicator. It refers to the number of points that can be displayed horizontally and vertically on the screen (lines and planes on the screen are composed of points). The higher the resolution, the more information can be included in the same screen. 480×800 resolution and 320×240 resolution are perfect display. Because there is little difference between the two, but the maximum resolution is not necessarily the most appropriate resolution. If 480×8000 LCD is used in 320×240 LCD, the display content will be smaller.   Visual area of LCD It refers to the part of the display area that can be used to display the image in practical application. The full size is actually the size of its frame and PCB board, and the part that can be used to display images does not reach this size at all, because the frame takes up some space. Generally speaking, the area of 4-inch 480×800 LCD is 51.84×86.4mm, and that of 3.5-inch 320×240 LCD is 70.08×52.56mm. But for LCD, the size of area is basically the size of the visible area, and the space occupied by the frame is relatively small. The 4-inch 480×800 LCD has a display area of 51.84 * 86.4mm.So choose LCD screen, choose suitable for your own equipment.   Reaction speed The unit of time used to measure reaction speed is millisecond (ms), which is the time required for a pixel to go from light to dark and from dark to light.