digital signage design

digital signage

alphabeticals

digital signage design

Market development of LCD splicing screen

In recent years, there have been more and more LCD splicing screen manufacturers, and competition in the large-screen splicing market has gradually become fierce. With the continuous breakthroughs in the three mainstream splicing product technologies such as LCD LCD splicing, DLP rear projection splicing, and PDP plasma splicing, LCD splicing There are more and more types of screens, and more and more diversified sizes, and there are more options for users to choose from. However, LCD splicing screens also have two sides, so the current large-screen splicing market is facing a complex situation such as a large number of convergent products and chaotic price wars. Especially with the rapid development and wide application of the LCD splicing industry, some people in the industry have suggested that the large-screen splicing industry may face a reshuffle. So where is the future of large-screen splicing? From the overall splicing market, analyze the technical aspects and industry applications of the three large-screen products, LCD LCD splicing screen, DLP rear projection splicing screen, and PDP plasma splicing screen. LCD splicing screens are the first choice. Since Samsung launched 46-inch ultra-narrow-edge splicing products in 2009, the LCD splicing market has shown a sustained high growth trend. The large LCD splicing screen has the advantages of high definition, high brightness, high color saturation, flexible splicing display combination, environmental protection and health, long life span, and low maintenance cost. At present, the largest LCD splicing unit on the market can be as large as 65 inches, and is

LCD touch screen cannot work, touch no response how to deal with

[Fault Phenomenon] One LCD touch screen doesn’t work, and there is no response when touching any part.   [Fault Analysis and Treatment] First check whether the connection interface is loose, and then check whether there is conflict between serial ports and interrupt number. If there is conflict, adjust resources to avoid conflict. Then check whether there are cracks on the surface of the touch screen. If there are cracks, replace them in time, Also need to check whether there is dirt on the touch screen surface, if there is, use a soft cloth to remove it. Observe and check whether the indicator light on the control box works normally. When it works normally, the indicator light is green and flashes.   If the above parts are normal, the touch screen can be checked by replacement method, first replace the control box, then replace the touch screen, and finally replace the host.   If it is a resistive touch screen, it can be overhauled as follows: 1)Check whether the connection of the touch screen is right, and whether one of the connections (taking 5V touch screen working voltage from the keyboard port) is connected. Please check the connection. 2)Observe the light condition of the touch screen control box. If it doesn’t light up or the red light is on, the control box is broken. Please replace it. 3)If not, please delete the touch screen driver and restart the computer, re-install the driver, or replace the driver with a newer version. 4)If

Advantages of ultra-narrow LCD splicing screen

The ultra-narrow LCD splicing screen is based on pure hardware and adopts parallel high-speed graphics processing technology to realize the unified processing of multiple high-speed video signals, fundamentally replace the plug-in splicing controller, and solve the problem of limited VGA signal input. Clarity, brightness, and color saturation are three important performance indicators of liquid crystals. The ultra-narrow-edge LCD splicing unit has the characteristics of high definition, high brightness, and high color gamut. Because the LCD uses backlight tubes as the light source, the edges are generally wide. The 40-inch ordinary LCD screen has a margin width of more than 11mm. If used for splicing, the splicing gap should be at least 22mm, which will affect the visual effect. The LCD splicing wall adopts a liquid crystal screen with a narrow-edge structure design, and the edge is reduced by more than double, which does not affect the visual effect when used for splicing. The LCD splicing screen has ultra-narrow edges, the number of splicing can be selected arbitrarily (row (m) X column (n)), and the size of the screen also has a variety of options to meet the needs of different use occasions. The ultra-narrow edge of the LCD splicing screen can be customized according to the requirements of different users, and you can choose functions such as single-screen display, full-screen display, and arbitrary combination display. In view of the inconsistency of parameters between the LCD screen and the driving circuit of the LCD splicing screen, the Tianjin LCD splicing screen

43 Inch Window Facing Display

43 Inch Window Facing Display

Product: 43 inch Window Facing Display
Model no.: 521XH
Installation time: 2021
Area: Belgium
Key features:
• 1920*1080 resolution
• 43″ 3000nits Super high brightness

• Automatic temperature control
• Integrated multiple CMS

Read More »
55 inch video wall

55 inch 3.5mm narrow bezel video wall study case in Germany

Product: 55 inch 3.5mm narrow bezel DID video wall
Installation time: 2021
Area: Germany
Key features:
• 55 inch 3.5mm narrow bezel video wall

• Original DID-LCD BOE panel
• Good white balance factory setting
• 4K resolution for the whole video wall screen
• Push out bracket, convenient for maintain service
• Daisy chain and DP loop support

Read More »
about video
Play Video

Related Products

Screenage digital signage Extreme Ultra-Thin Display

Extreme Ultra-Thin Display

This model is the latest innovation in the digital signage industry, With only 20mm ultra-narrow bezel width results in a near-seamless display, bringing you a different viewing experience.

Read More »