digital signage computer

LCD mainly consists of LCD black-and-white screen and TFT color screen. The following mainly introduces the relationship between the manufacturing difficulty and size of LCD black-and-white screen: According to expert statistics, the size and process difficulty of LCD segment code screen have such a rule: the larger the size, the more complex the manufacturing process. The main reasons are as follows:   The larger the size of LCD, the more difficult it is for staff to operate.   The larger the size of LCD is, the higher the requirement of equipment grade is.   The larger the size of LCD, the higher the defect rate of the product.   The larger the size of LCD, the more bad things will appear, such as darkening.

LCD splicing screens are divided into optical seamless LCD splicing screens and electronic seamless LCD splicing screens. The realization principle of the optical seamless LCD splicing screen is to install a special optical glass panel body on an ordinary 3.5mm panel, and realize the principle of line-of-sight refraction through the glass, so that the originally split screen can be seen in an image through the optical glass , The seams with black edges are completely invisible, and the display effect of the picture is real. The realization principle of seamless LCD splicing screen electronics is that by installing a special electronic bar on each panel unit, the electronic bar emits light equivalent to LED, and the light is emitted by two electronic bars between the seams, which can be displayed on the display. Achieve seamless seams. The seamless LCD panel joining technology has reached an unprecedented level, realizing the arrival of the era of true seamless joining technology. The seamless LCD panel joining technology is used in the high-end display field. It can be said that the visual impact it brings is also unprecedented. The seam adopts full-screen active LED electronic pixel compensation display, and the optical lens and optical refraction principle are seamless. The pixel pitch of LED electronic pixel correction is 1.5mm or less. The electronic pixel compensation LED adopts SMD label technology and does not use large particle lamp-like display. After LED electronic pixel correction, the edge of the condenser lens with high transmittance is added to

With the wide application of LCD in vehicle products, instruments and other electronic products, there will always be flashing in the process of use, which will affect the use of customers. What we should do at this time? Now we would like to share with you the causes and solutions of LCD screen flashing： The frequency of the LCD screen itself is too high, resulting in the flash screen. However, in real life, it is rare for the device to flash due to high frequency. According to the industry technical personnel, people’s naked eyes have no sense of flicker for images over 60Hz, while the design standard of general LCD screens is basically within this data range, so under normal circumstances, the frequency will not be too high, but at the same time, the screen itself will not be excluded from failure. After testing by relevant instruments, it is really the fault of the screen itself. In addition to replacing the new monochrome LCD screen, it is to design the software related to the equipment. LCD flash screen solution: the best way is to increase the OSC frequency of IC to see the flash of LCD screen. Of course, if the LCD has separate row and column drivers, it can also be adjusted by setting the driver chip.   The frequency of LCD is close to that of light source. This is very common. Because the frequency of different light source is different, in some specific cases, when the frequency