digital signage companies near me

digital signage


How to prevent static electricity of LCD?

LCD screen will be widely used in many electronic products, one thing has been widely welcomed, and you will want to solve some problems, and pay attention to some things, let’s talk about how to pay attention to the anti-static problem of LCD screen? Electrostatic adsorption of dust reduces the insulation resistance of components and shortens the service life; Electrostatic discharge (ESD) damage, resulting in electronic components cannot work; the electromagnetic field produced by electrostatic discharge has a large amplitude and a wide frequency spectrum. Such electrostatic noise and electromagnetic interference make electronic equipment unable to work normally or even damaged.   Pay attention to:   The wristband should keep the body and the ground equipotential. ESD protection workbench should keep equipotential between device and ground. It is not allowed to place electrostatic insulating materials in the safe area .The circuit board with IC must be handled on the antistatic workbench. Wristbands and shoe covers should be tested every day to ensure that they meet the parameter requirements.   All instruments and equipment shall be grounded. Regard all components as electrostatic sensitive devices. Never touch sensitive devices or components without good grounding.   In the absence of other anti-static measures, do not take the IC installed in the anti-static tube. Use fixed-point ion eliminator in the process that may generate static electricity. If the IC is not on the process line or anti-static workbench, store them in a container with grounding shield. The gas and liquid flowing through IC should

By the Affective of COIVD-19, as the leader of chip set touch sensor companies of ILITEK, is running out of the touch screen chipset, and all touch screens will increase in price.

In 2020, as the epidemic has stimulated people’s demand for work, study, entertainment and other applications at home, the display industry has achieved rapid development, and the upstream chip of the supply chain is also booming. Affected by the global chip shortage, display driver chips are facing price increases. According to data, the total demand for display driver chips is expected to grow to 8.4 billion in 2021. In the display driver chip market, Taiwanese design companies occupy a dominant position in the LCD field, accounting for nearly 80% of the market in 2020. Heria and ILITEK ranked first and second respectively. Due to the sudden attack of the epidemic in 2019, all factories were halted urgently, resulting in a shortage of ILITEK’s chip inventory. In addition, due to the global shortage of COVID-19 vaccines, only about 11% of Taiwan’s population has been vaccinated, which has caused difficulties for factories to resume work, and has exacerbated the problem of imbalance between supply and demand in the market. Chip prices will continue to rise in the future.

About the resolution of LCD

Resolution Resolution is a very important performance indicator. It refers to the number of points that can be displayed horizontally and vertically on the screen (lines and planes on the screen are composed of points). The higher the resolution, the more information can be included in the same screen. 480×800 resolution and 320×240 resolution are perfect display. Because there is little difference between the two, but the maximum resolution is not necessarily the most appropriate resolution. If 480×8000 LCD is used in 320×240 LCD, the display content will be smaller.   Visual area of LCD It refers to the part of the display area that can be used to display the image in practical application. The full size is actually the size of its frame and PCB board, and the part that can be used to display images does not reach this size at all, because the frame takes up some space. Generally speaking, the area of 4-inch 480×800 LCD is 51.84×86.4mm, and that of 3.5-inch 320×240 LCD is 70.08×52.56mm. But for LCD, the size of area is basically the size of the visible area, and the space occupied by the frame is relatively small. The 4-inch 480×800 LCD has a display area of 51.84 * 86.4mm.So choose LCD screen, choose suitable for your own equipment.   Reaction speed The unit of time used to measure reaction speed is millisecond (ms), which is the time required for a pixel to go from light to dark and from dark to light.

digital signage companies near me

about video
Play Video

Related Products

Let's Have A Chat!

Learn How We
Helped 1000
Projects Get
Gain Success.