crestron digital signage solutions

It is a common misconception that all electronics should exhibit the same colors, especially with devices with the same make and model. However, this is often not the case. Have you considered what’s actually causing the picture to look different? It is a common misconception that all electronics should exhibit the same colors, especially with devices with the same make and model. However, this is often not the case. This is illustrated with a simple experiment: when you put the same image on two monitors side-by-side, you have at least a 95% of chance that the images will not look the same, and you will probably find yourself in a situation like that shown in Figure 1. The monitors do not need to be the same make and same model, but for illustration purposes, we used four identical monitor images.                  Different colors on same kind of Devices                                                                                Figure 1: Different colors on the same type of device Another place to witness this phenomenon is when you are shopping for a new TV. Most people go to a large electronics store and decide between the TVs on display. Then, you pick the one with the colors or image quality (or price) that you find

World is now changing and using new technologies to get high performance as well as cost effective solution. As in the past, SAMSUNG, LG, AUO, BOE, and other well-known LCD panel suppliers only provided fully finished panels, resulting in high costs. With the advancement of the LCD industry, the cost of a whole machine is now lower than the cost of an LCD panel. As a result, Clients are looking for another cost-effective solution to assure a reasonable profit. Then, in order to reduce the material cost of the External Frame, the Open Cell solution is developed, which helps up the expansion of small-scale companies in the LCD industry. So, what is open cell solution and how it’s going to make a cost effective solution? An Open Cell is just a part of LCD panel without backlight. As we all know that getting the fully finished LCD panel (Traditional LCD module product) from SAMSUNG, LG, AUO, BOE, and other well-known suppliers were expensive. But, if we use Open cell solution to assemble all parts by ourselves to achieve the complete LCD module panel that would be very cost effective. In another approach, the Open Cell solution will not only reduce the cost of the LCD screen, but will also make the entire machine thinner than before. Certainly, a solution with a cheaper cost and a more fashionable appearance is currently very popular. The Open Cell Solution products will be the dominant trend in the LCD sector in the near future.

With the progress of science and technology, LCD is more and more popular. However, the inherent and inevitable shortcomings of LCD have also been paid attention to. When it comes to LCD black spots, many people may not understand. Today, I will teach you how to look at black spots. I hope it can help you.   What is the dark spot of LCD? In fact, dark spot is more hidden than bright spot and bad spot, but its influence on use is far greater than bad spot. Sometimes on some screens, there will be some patches that are not very big. The black small class is as big as the soybean, and the big class may be as big as the thumb. Different from the bright and dark spots, the dark color system is only partially dark, which is not easy to find from the front, but only from the side.   The main reason for the formation of dark spots is that the external force has been squeezed for long time. We think that it is probably due to improper handling in the transportation process. LCD screens with black dots are usually hard to find on the front and more obvious on the side (just like the test perspective).We suggest that when you buy LCD, you should not only look at the bad points of the screen, but also look at the surface of the screen from multiple angles, and set the screen to white. If you find