55 inch video wall display

lcd video wall

alphabeticals

Digital Signage Daily maintenance

1. Keep the humidity in the environment where the digital signage is used, and don’t let anything with damp properties enter your digital signage. Powering on digital signage that contains moisture will cause corrosion of the digital signage components and cause permanent damage. 2. To avoid problems that may be encountered, we can choose passive protection and active protection, try to keep the items that may cause damage to the digital signage away from the screen, and when cleaning the screen, wipe it as gently as possible to reduce the possibility of injury Minimize. 3. The relationship between digital signage and our users is the closest, and it is very necessary to do a good job in cleaning and maintenance. After being exposed to wind, sun, dust, etc. in an outdoor environment for a long time, there will definitely be a piece of dust on the screen after a period of time. This needs to be cleaned in time to prevent dust from covering the surface for a long time to affect the viewing effect. 4. It is required that the power supply is stable and the grounding protection is good. Do not use it under severe natural conditions, especially strong thunder and lightning. 5. It is strictly forbidden to enter the screen body such as water, iron powder and other easily conductive metal objects. Digital signage should be placed in a low-dust environment as much as possible. A large amount of dust will affect the display effect, and too

Daily maintenance methods for LCD advertising machines

In daily life, we must keep the habit of “cleaning” the LCD advertising machine regularly. You can spray it on the LCD advertising machine screen with a special potion, and then gently wipe it with a clean white cloth. Try not to use a damp cloth with too much water content. Too much water content on the damp cloth can easily cause water to stay on the screen. Water entering the screen through the edge can cause a short circuit in the system and the LCD advertising machine cannot work normally. It is recommended to use soft scrubbing materials such as glasses cloth and lens paper to scrub the screen to avoid unnecessary scratches on the LCD advertising machine screen. The working environment of the LCD advertising machine directly affects the operation and service life of the LCD advertising machine. If the working environment of the LCD advertising machine is too bright, or even direct sunlight, this will not only affect the visual communication of the LCD advertising machine, but also damage the LCD advertising Machine screen electronic components. The air humidity of the working environment where the LCD advertising machine is located must be kept suitable, and two extremes must not be taken. Once the electronic equipment is too humid, it will only affect the circuit conditions and cause the LCD advertising machine to fail to work normally. No matter how good electronic products are, they will have their own longest operating time, and LCD advertising machines are no

LCD touch screen cannot work, touch no response how to deal with

[Fault Phenomenon] One LCD touch screen doesn’t work, and there is no response when touching any part.   [Fault Analysis and Treatment] First check whether the connection interface is loose, and then check whether there is conflict between serial ports and interrupt number. If there is conflict, adjust resources to avoid conflict. Then check whether there are cracks on the surface of the touch screen. If there are cracks, replace them in time, Also need to check whether there is dirt on the touch screen surface, if there is, use a soft cloth to remove it. Observe and check whether the indicator light on the control box works normally. When it works normally, the indicator light is green and flashes.   If the above parts are normal, the touch screen can be checked by replacement method, first replace the control box, then replace the touch screen, and finally replace the host.   If it is a resistive touch screen, it can be overhauled as follows: 1)Check whether the connection of the touch screen is right, and whether one of the connections (taking 5V touch screen working voltage from the keyboard port) is connected. Please check the connection. 2)Observe the light condition of the touch screen control box. If it doesn’t light up or the red light is on, the control box is broken. Please replace it. 3)If not, please delete the touch screen driver and restart the computer, re-install the driver, or replace the driver with a newer version. 4)If

55 inch video wall display

about video
Play Video

Related Products

Let's Have A Chat!

Learn How We
Helped 1000
Projects Get
Gain Success.